基于互协方差稀疏重构的MIMO雷达低仰角估计算法

针对低空目标仰角估计时, 多径信号间的混叠严重影响雷达的测角性能的问题, 基于压缩感知理论的波达方向(direction of arrival, DOA)估计算法与多输入多输出(multi-input and multi-output, MIMO)雷达体制结合起来共同进行低空目标DOA估计的研究, 提出了一种基于互协方差矩阵稀疏重构的MIMO雷达低空目标DOA估计算法。首先, 对MIMO雷达多径接收信号广义匹配滤波后的虚拟矩阵向量化处理, 并针对向量化后虚拟孔径扩展带来运算量大的缺点, 通过降维处理来减少运算量; 然后利用多快拍数互协方差矩阵中的噪声独立不相关的优点, 降低噪声影响, 提高算法估计性能; 最后转化为凸优化问题进行稀疏恢复。仿真结果表明算法在直达信号与多径反射信号相互削弱的情况下, 仍能有效估计低空目标的仰角, 较L1-SVD和L1-SRACV算法对低空目标具有更好的仰角估计性能。     

多重网络中的创意扩散模型研究

基于线上线下多种渠道的创意扩散研究是企业管理的新兴研究热点之一.为此,引入多重网络理论与传播动力学理论,考虑工作中线下沟通、工作中通过企业社交媒体在线沟通及非工作时间电子沟通三种渠道,构建多种渠道构成的多重网络中的创意扩散模型.研究创意在多重网络中持续扩散的阈值条件,并对创意在多重网络中的扩散过程进行仿真实验.结果表明:1)当员工在单位时间内通过以上各渠道沟通的平均次数较接近时,在多重网络中创意扩散的速度较快,创意扩散的范围较广;2)与匀质网络相比,当非工作时间电子沟通子网络是无标度网络时,在多重网络中创意扩散的速度较快,扩散的范围较广;3)增大子网络层间创意扩散的相互促进作用对整个多重网络中创意的有效扩散有积极影响.     

基于元学习的航空电子设备特征选择算法推荐方法

为了对航空电子设备的测试数据进行有效约简, 去除冗余信息和不相关特征, 基于机器学习领域现有的特征选择算法, 提出了一种元学习框架下的航空电子设备特征选择算法推荐方法。所提方法旨在根据不同航空电子设备测试数据所蕴含的信息, 推荐合适的特征选择算法。首先, 分析了数据集特征的描述方法。然后, 介绍了采用综合度量指数的算法性能评价方法。最后, 给出了特征选择算法推荐方法的框架。使用42个航空电子设备的测试数据和13个过滤型特征选择算法建立了元数据库, 采用留一法进行交叉验证, 推荐命中率达到了90%以上, 推荐性能比例达到97%以上。     

某电解铅厂周边农田土壤和玉米中铅污染评价及同位素溯源研究

为探究铅在土壤-玉米-大气中的迁移转化行为,以某电解铅厂周边农田土壤和玉米为研究对象,采集距排烟口50 m、110 m、300 m、500 m、700 m、900 m和3 000 m处的土壤和玉米样品,利用原子吸收光谱仪(AAS)和电感耦合等离子体质谱仪(ICP-MS)分别测定土壤、玉米和大气样品的铅含量和同位素比值。结果表明:电解铅厂周边的玉米均受到铅的污染,玉米根中的铅主要来自土壤,籽粒中的铅很有可能大部分来自大气,少部分来自土壤,茎中的铅很可能来自土壤而不是叶面传输;籽粒中的铅与叶片中的铅具有显著的相关关系(P0.01),相关方程为y=-0.0002x~2+0.0461x-0.4643,R=0.966 7。     

A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

Maxwell's role in turning the concept of model into the methodology of modeling

This is a contribution towards a history and philosophy of modeling in its early stages in electromagnetism. In 1873, James Clerk Maxwell (1831–1879) hinted at the methodology of modeling at the end of his Treatise on Electricity and Magnetism. We focus on Maxwell's impact on physicists who immediately followed him, specifically Oliver Lodge (1851–1940) and George Francis FitzGerald (1851–1901). We begin with the role that the scientific concept of model played in the late nineteenth century, as assessed by Ludwig Boltzmann (1844–1906). We then discuss the role of hypothesis as a methodology, the appeal to (dynamical) illustration, and the way Maxwell applied model and working model in his studies of electromagnetism. We show that for Maxwell these key terms were kept distinct, but Lodge did not maintain these distinctions and, in this regard, FitzGerald followed Lodge. Notwithstanding Lodge's influence, Fitzgerald modified Maxwell's theory based on the mechanical model he designed, thereby implicitly taking the first step towards modeling. This methodology consists in drawing consequences from the (mechanical) model to the (electrodynamic) theory and modifying the latter in light of the functioning of the former. At the core of our argument is the thesis that it was a methodological novelty to move from the concept of model to the methodology of modeling. The introduction of modeling as a new methodology into physics in the late nineteenth century was a major event which deserves proper recognition.     

球形压头的滑动速度对材料微米划痕响应的影响

在恒定的法向载荷下,使用Rockwell C 120°金刚石压头对聚碳酸酯(PC)、熔融石英、紫铜和镁合金AZ31进行微米划痕测试,研究滑动速度对试样划痕响应的影响.压入深度小于压头的球锥转变深度,确保仅有压头顶端的圆球部分与试样接触.结果表明:随着滑动速度的增加,压入深度、残余深度和划痕沟槽的宽度均非线性减小,划痕硬度和弹性恢复率均非线性增大;PC和紫铜的划痕摩擦系数先增大后减小,PC的黏弹性行为对其摩擦响应有显著影响;熔融石英的划痕摩擦系数先增大后减小,最后趋于稳定;镁合金AZ31的划痕摩擦系数先减小后增大.熔融石英、紫铜和镁合金AZ31的划痕摩擦系数的变化趋势可通过几何接触模型进行解释.     

基于40Cr高温动态力学性能的磨削表面动态再结晶行为

通过分离式霍普金森压杆(SHPB)实验得到了40Cr合金钢在高温高应变率下真应力-真应变曲线，据此确定了材料发生动态再结晶的临界条件.采用解析法和实验法分别求解了磨削强化层的温度场和塑性应变场分布.结果表明，磨削强化层在磨削深度方向具有较大的温度和塑性应变梯度;150μm强化层内会发生奥氏体转变;磨削表面最高温度可达1060℃.在磨削亚表面60μm内会产生剧烈的塑性变形，达到了再结晶的临界条件.较大的磨削深度使磨削强化层塑性应变增大，再结晶现象越充分，微观组织细化程度越高.     

一类变指数退化抛物方程的解

考虑如下的变指数退化抛物方程解的适定性问题。利用抛物正则化方法证明了解的存在性。对检验函数适当选取，证明了解的唯一性。在边界上，扩散系数b(x,t)=0，解的唯一性可以不依赖于边界条件。     

基于Mesh网的矿工心电信号无线监测系统研究

在矿难事故发生后实时监测被困矿工的生命体征,能够给营救工作提供重要的信息参考,因此设计了一款基于Mesh网的矿工心电信号无线监测系统.通过ADS1292心电检测模块对矿工的实时心电信息进行监测,然后将心电数据经过STM32F103单片机处理后通过OLED屏显示出来.同时,处理后的数据还可以通过无线组网模块发送至上位机进行显示,从而实现对井下采煤工人生命体征进行远程监测的目的.测试结果表明:该系统可以准确获取矿工心电信号波形,实测心率误差不超过4％,具有良好的应用前景和实用价值.